Ultrasonic humidifier does not fog

　　The reason why the ultrasonic industrial humidifier does not produce fog: there is a main atomizer plate core in the humidifier, called the atomizing plate. The atomizing plate is placed in the water tank. If the water level is not at the proper height, fog will not be generated. The water level and the atomizing plate are placed at a reasonable position.

　　Solution to inappropriate water level: The plate core of the ultrasonic atomizer bubbles in the water, and atomization is generated through the ultrasonic vibration principle, which has strict requirements on the water level! The water level of the atomizing plate is generally not standard at the height of 7cm. Adjust the height to reinforce the atomizing plate, and the industrial humidifier also needs to be placed stably!

　　2、 It is also one of the common reasons why the ultrasonic humidifier does not produce fog when the humidifier case is dry

　　The reason why the ultrasonic industrial humidifier does not produce fog: when the humidifier works, water will also be consumed at the same time, because the fog is caused by water.

　　Solution to case water drying: timed humidification is a common method, and manual operation is troublesome, and the case water drying will cause damage to the atomizing plate, so when purchasing the ultrasonic humidifier, it is necessary to pay attention to those humidifiers with timed automatic water filling function.

　　3、 The ultrasonic humidifier does not fog due to water quality problems

　　Reasons for failure of ultrasonic industrial humidifier: the water quality problem mainly occurs in the blockage of atomizing plates. The scale is larger than that of atomized particles, and the water quality is poor. The atomizing plates are one of the main reasons for blockage of scale.

　　Solution to water quality problem: add cleaning liquid to dissolve scale, such as detergent, cola, soda, etc.

　　However, the atomizer is a consumable material, which must be replaced regularly when it is damaged to a certain extent, so the humidifier user needs to prepare some atomizers.

　　Working principle of ultrasonic humidifier

　　There are two types of humidification: immediate drainage pipeline humidification and circulating water humidification.

　　The principle of water change of ultrasonic industrial humidifier is to transfer water to the humidifier water tank.

　　Operating principle of ultrasonic humidifier

　　The wet film material absorbs water symmetrically to produce uniform shrinkage water. When the centrifugal fan blows through the wet film raw materials, the total contact area between the dry gas and the wet film surface is large, and the water is sufficient to digest the heat of the gas, which then dissolves and evaporates, exceeding the main purpose of increasing the moisture in the body.

　　Nowadays, there are many water materials used in industrial humidifiers, such as wet film, inorganic glass fiber wet film, metal material aluminum alloy profile wet film, metal stainless steel humidifier, etc.

Read recommendations:

H04 Heater Fan

K7 Car Air purifier

Function and working principle of Air purifier

aromatherapy diffuser

table fan Processor