What is the power saving principle of ultrasonic humidifier.

　　Saving power engineering is the key advantage of ultrasonic industrial humidifier. When the centrifugal fan is used to suck the dry gas into the industrial humidifier, some water and dry gas touch to carry out exothermic reaction, causing vaporization, which makes the gas wet (the relative humidity of the air increases), and the other part of the non evaporated drinking water returns to the water storage tank for continuous use as a circulating water pump. Volatile substances can clean gas, remove dust in indoor air quality and harmful substances melted in water. The results show that the ultrasonic humidifier in the direct discharge pipeline selects the water in the tap water pipe.

　　Basic working principle of ultrasonic humidifier

　　The circulating water of the membrane wet industrial ultrasonic humidifier is a continuous circulation of the "water storage tank", which absorbs a lot of heat from the gas, and the temperature is close to 20 ℃. According to the basic theoretical analysis, the flow of low-temperature water is low, and when the gas changes from liquid to vapor, it must=the heat that must be digested is large. Before the wet air is dissolved, there is usually a wet film humidifier. At this time, although the temperature rises, it shows a white drop, resulting in the consumption of electromagnetic energy and the inability to reach the predetermined humidification amount. However, in the whole process of circulating water humidification, the refrigeration temperature of wet film humidifier is higher. This kind of wet water is very easy to humidify and can be used on the refrigeration unit to minimize the use.

Read recommendations:

J31 Air Humidifier

TS06

Under what circumstances should an air purifier be used?Air purifier Processor

aroma diffuser manufacture

aromatherapy diffuser Factory