The GS series industrial humidifier is suitable for the humidification of factory workshops/warehousing/laboratory

　　At present, many factories such as paper factories, textile factories, printing factories, plastic factories, and electronic factories and other workshops/warehousing/laboratory, all need to be used in industry

　　The humidifier is used to increase the humidity of the air, thereby preventing a large amount of static electricity and reducing the drying of dust. Compared to the dry season of autumn and winter, the production environment

　　Humidity control is crucial. Because many products will be scrapped under the influence of dry air, many times the humidity of production cannot be

　　When the production is required, the humidifier must be humidified by the production workshop. GS series industrial humidifier is suitable for factory workshop/warehousing/laboratory

　　Moisturizing can accurately and reasonably ensure the reasonable humidity of production and ensure that the overall operation is carried out normally.

　　The GS series industrial humidifier is an industrial humidifier designed by ultrasonic technology. Through the high -frequency resonance of atomized tablets, the water is thrown away from the water surface

　　However, the flowing water mist and blowing out of the machine do not need to heal or chemical agent to generate 5 μm of water particles floating in the air, so as to wait for the water to add wet and empty

　　The purpose of qi. The GS series of industrial humidified machine water tanks are made of stainless steel. Electric, ultrasonic atomization board, waterproof fan, computer version, etc. spray

　　The amount of fog is large, and the relative humidity can be quickly met during the unit time, and no water droplets can be generated. The energy consumption indicator of the unit humidification is low, and the ultrasonic type

　　The energy consumption of the industrial humidifier is only 0.05kW/(kg.h), which is equivalent to 1/10 ~ 1/1/100 of other humidifiers. The daily operation cost is low. Small volume, An

　　Easy to install, it can be installed independently as a system. The control method is flexible and convenient. There are three control methods to choose from: switch

　　Control, timing control, and automatic control, can be flexibly selected and matched according to the on -site environment and personnel arrangements when selecting.

Read recommendations:

H01 table fan Heater Fan

F19 Cooling Fan

How to use Humidifier correctly? It’s not that the higher the humidity, the better.

Cooling Fan Processor

air humidifier sales