CREATIVITY CHANGES YOUR LIFE
Tel: +86 0755-84870739
Email: info@nexhc.com
Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |
source:Optimization dedicated release time:2021-12-03 Hits: Popular:aromatherapy diffuser direct sales
Common failures of air purifiers are generally fuse of the power supply or failure of the high-voltage generating circuit. It is necessary to disassemble the electrical inspection to know the specific problem. You can check according to the following steps. The following operations can only be performed on the basis of disconnecting the power supply.
1. Check whether the fuse is fused, if it is broken, check the original air purifier before replacing it.
2. Check whether the coil of the step-up transformer is burnt out. Use a multimeter to measure its resistance. If the coil is open or short-circuited, replace the transformer of the same model.
3. Check whether the rectifier tube and capacitor of the voltage doubler rectifier circuit are damaged, and whether the oscillator has stopped shaking. Use a multimeter to test the relevant components one by one on the air duct purification device. Replace the burned-out component to eliminate the fault.
Fault 2: The high-voltage indicator light is on, but the fan does not rotate, and the high-voltage indicator light is on, indicating that the circuits generated by the high voltage of the power supply are normal, and the fan may be faulty. You can check from the following aspects whether the fan blade is stuck by foreign matter and whether the bearing is severely worn. If the air duct purifier is normal, check whether the motor lead wire is open and whether the winding is damaged. It can be measured with a multimeter. If the winding is open or broken, the fan motor of the same specification should be replaced. If it is a negative ion air purifier, the following failures may also occur
Fault 3: Fire between the negative ion generator poles, check whether the humidity of the ambient air conditioning box is too high, or it may be caused by the bending and deformation of the positive and negative plates. Use tweezers to correct the pole piece. If it is still on fire, move the air purifier to a dry place for trial use. Generally, the fault can be eliminated.
Read recommendations:
The three main functions of the fragrance system.aromatherapy diffuser manufacturer
NextReasonably combined with humidifiers and other air-conditioning boxes for purification
Popular recommendation
J6 mini humidifier Air Humidifier
2021-09-14J7 Air Humidifier
2021-09-14H01 table fan Heater Fan
2021-09-14F10 neck fan Cooling Fan
2021-09-14K7 Car Air purifier
2021-09-15Fragrance system in hotel lobby.essential oil diffuser
2022-05-20The humidifier is here, continuous moisturizing, fast humidification and silent operation!
2022-03-17Difference between atomizing tablets
2022-01-19The working principle and internal analysis of air purifier,Car Air purifier Merchant
2021-12-20What is the method of hotel aromatherapy and hotel aroma system?
2022-04-19The Guardian of the Cool Summer
2024-05-18The Companion of Electric Fans
2024-05-18The humidifier atomizer blade is malfunctioning
2024-05-09The humidifier does not produce fog.aroma diffuser Manufacturing
2024-05-08The hazards of baby humidifiers
2024-04-27Is there a relationship between infant pneumonia and using a humidifier
2024-04-24The time when the humidifier is turned on during sleep at night
2024-04-17aromatherapy diffuser company.Principle of a humidifier
2024-04-13aromatherapy diffuser Processing.Points to note when using a humidifier
2024-04-13The reason why the humidifier does not fog is that the scale causes the oscillator to bind water and
2024-04-11Contact the following for inquiries regarding our services and products.