CREATIVITY CHANGES YOUR LIFE

Tel: +86 0755-84870739

Email: info@nexhc.com

Home  >  News  >  Industry news

News

Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |

Can the humidifier use tap water? Reasons and solutions for the humidifier not fogging

source:Industry news    release time:2022-03-22    Hits:     Popular:aromatherapy diffuser direct sales

  J9 usb humidifier

  The humidifier cannot use tap water. The humidifier sprays water into the air after atomizing it through ultrasonic waves, so these atomized fine water droplets will enter the body with the human body's breathing. Tap water contains mold, bacteria and impurities, which can affect health when entering the human body. Therefore, tap water should not be used directly in the humidifier.

  When using a humidifier, it is best to use purified water. Under normal circumstances, purified water is processed and filtered, which will not cause harm to the human body and is relatively clean. On the other hand, tap water contains impurities such as metal ions and silicon. These impurities are turned into mist and inhaled into the respiratory tract through the humidifier, causing the trachea to contract and causing symptoms such as coughing.

  Reasons and solutions for the humidifier not fogging

  1. Please control the air humidity when using. The fog is not the bigger the better. In winter, the humidity that the human body feels comfortable is about 50%, please be appropriate when humidifying.

  2. Clean the humidifier regularly. Under normal circumstances, the water tank needs to be changed to prevent the growth of bacteria, and the humidifier should be cleaned and maintained for about 1 week.

  3. Add water and power on the machine, put your hand on the air outlet to see if there is wind, if there is wind, just dump the water in the machine and turn on the power.

  4. When there is no wind at the air outlet, it is necessary to check whether the fan is running normally. Open the screw at the bottom of the base and check if the fan plug is loose, if so, reinsert the plug. If the fan does not work after reconnecting the cable, it is determined that the fan is faulty and the fan can be replaced.

  5. Check whether the power is on, if not, it is judged that the power board of the bed is burned out, and the power board needs to be replaced at this time. If the power is ok, you need to check if the float is stuck on it. Please open the fuel tank and try adding water to the stand with a cup. If there is no problem with the above, you need to check whether there is a problem with the replacement order at this time. If there is a problem with the sheet replacement performance, just replace the sheet at this moment.


Read recommendations:

F23 electric fan mini fan Cooling Fan

J15 Air Humidifier

The three main functions of the fragrance system.aromatherapy diffuser manufacturer

mini fan Factory

desk fan Factory

Latest news

Hot

Inquiries

Contact the following for inquiries regarding our services and products.

Inquiry form