Basic principle of ultrasonic humidifier equipment.humidifier diffuser Vendor

　　It is mainly generated by the high -speed vibration of the humidifier, and then evaporates into fog. It is automatically controlled by stable dual water levels. It uses a high -frequency oscillation (1.7MHz oscillation frequency, generates water mist gas). Throw it out to form natural flowing water. This method can effectively improve the atomizing and humidity performance of the device, and the atomization particles are evenly distributed in the range of 5 microns to reduce the energy consumption of the unit volume.

　　Generally, ultrasonic humidifiers are all in -one, which can be used by power! No need to install it manually!

　　Pay attention to the voltage of the industrial humidifier. The voltage of the ultrasonic humidifier is high, usually a voltage of 220V. The circuit generates a oscillating pulse voltage higher than 20 kg, and the stainless steel material that drives electro -sound transformations produces mechanical vibration and water is atomized.

　　Pay attention to the installation location of ultrasonic humidification equipment, and the installation location must be in the area where the explosion -proof requirements are required to prevent explosion.

　　The installation principle of ultrasonic humidifier requires a place where the humidifier is more than zero outside the dehumidifier environment.

　　Determine the amount of humidity in the factory workshop. This parameter is very important. In order to cooperate with the consumer's mentality, some companies are arbitrarily marked with the amount of humidification. The strict requirements of the workshop must not be lower than the designated product.

Read recommendations:

A16 Aroma Diffuser

A2 aroma diffuser.essential diffuser

Removal of summer formaldehyde to create a home living environment Recommend an air purifier

aromatherapy diffuser wholesaler

F05 Cooling Fan