Precautions for using heaters

　　Many families will configure a heater to prevent the cold winter. So, what should you pay attention to when using a heater?

　　First, the power should not be too large

　　Due to the high power of the heater, it should not be used with high-power electrical appliances at the same time, otherwise the heater will be easily damaged. In addition, the heater should not be placed next to the power socket to prevent the heat from rising and burning the power supply and causing a fire.

　　2. Install the overcurrent protection socket

　　If there are electrical appliances that are easy to cause sudden changes in current and start more frequently, such as electric welding machines, air conditioners, etc., which are used at the same time as the heater, it is easier to damage the heater. Use a socket with an overcurrent protection device or use a regulated power supply. When no one is in the house, be sure to unplug the heater.

　　3. Items that should not be covered

　　Items cannot be covered on the heater. The surface temperature of the electric heater is relatively high. Once the items are covered, the heat cannot be dissipated in time, which will cause the machine to burn down or ignite other items.

　　4, not close to the heater for heating

　　Some people like to stay close to the heater to keep warm, and even put their hands and feet on the heat sink, which is very easy to get burned. Some people blow the heater directly on the body, although it is warm for a while, but if it is done for a long time, it will burn the skin. So don't get too close to the heater when using the heater, especially don't let the air outlet of the heater directly touch a certain part of the body to heat.

　　5, heater installation and placement

　　In the installation and placement position, the heater should be placed in a place that is not easy to touch, away from combustibles, and the back should be about 20 cm away from the wall. If the heater is placed in the bathroom for heating, special care should be taken to avoid the adverse consequences caused by the power supply encountering water. Install the power socket outside the bathroom, and the heater's wires must be protected by insulating rubber, and the connection with the body can be prevented from contacting with water.

Read recommendations:

L05 Night Light

L06 Night Light

How to choose the right fragrance oil

desk fan direct sales

F07 Cooling Fan