CREATIVITY CHANGES YOUR LIFE

Tel: +86 0755-84870739

Email: info@nexhc.com

Home  >  News  >  Industry news

News

Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |

How to clean the air purifier.essential oil diffuser

source:Industry news    release time:2022-07-05    Hits:     Popular:aromatherapy diffuser direct sales

  K6 portable air purifier Car Air purifier

  1. The core component of the air purifier is the filter layer, and the air purifier filters produced by various manufacturers generally have three or four layers. The first layer is the pre-filter. The materials used by each brand of the filter are different, but their functions are the same, mainly to remove dust and hair with larger particles. The second layer is a high-efficiency HEPA filter, which mainly filters allergens in the air such as mite debris, pollen, etc., and can filter inhalable particles with a diameter of 0.3 microns to 20 microns. This layer of filter filters out the PM2.5 particles that consumers are generally concerned about. The service life of this layer of filter is generally several years. If the filter is full of dust and particles after long-term use, these deposits are likely to be blown into the air again with the air.

  2. The dust filter or the dust collector plate in the air purifier should be cleaned frequently, usually once a week, and the foam plastic or the plate should be cleaned with soap and dried before use to keep the airflow unobstructed and hygienic. When there is a lot of dust on the fan and electrode, it needs to be removed, and it is generally maintained once every six months. Dust on each electrode and wind blade can be removed with a long brush. Clean the air quality sensor every 2 months to ensure the purifier is running at peak performance. If the purifier is used in a dusty environment, clean it frequently.

  3. When the indoor humidity is very high, the air quality sensor may form condensation water. So even if the air quality is good, the air quality indicator may just be poor air quality. In this case, you must clean the air quality sensor or use one of the manual speed settings. Use a soft brush to clean the air inlet/outlet of the air quality sensor, remove the protective cover of the air quality sensor, use a slightly damp cotton swab, clean the air quality sensor, air inlet and air outlet, wipe it with a dry cotton swab If it is dry, reinstall the protective cover of the air quality sensor. When the air purifier is not in use, it should be cleaned and put into the packaging box, and stored in a ventilated and dry place. Usually should pay attention to moisture, so as not to reduce the efficiency or damage due to moisture.


Read recommendations:

H03 Heater Fan

L02 Night Light

The air purifier rides on the wings of the Internet of Things!

Car Air purifier wholesaler

table fan Factory

Latest news

Hot

Inquiries

Contact the following for inquiries regarding our services and products.

Inquiry form