Causes and Countermeasures of not Heating of Heater Fan.oil diffuser price

source:Industry news release time:2022-06-10 Hits: Popular:aromatherapy diffuser direct sales

　　Causes and Countermeasures of not Heating of Heater Fan

　　As a necessary electrical appliance in winter, if there is a problem when using the heater, it will make us feel very uncomfortable especially for those who are afraid of the cold. Therefore, I summarizes some reasons and suggestions for the failure of heater heating. Hope they can be a little help.

　　Reason 1: Heater overheating protection

　　Now the heater is generally equipped with a built-in temperature limiter. When the temperature is higher than the safe temperature of the fuselage, it will automatically cut off the power.

　　Suggestion: Wait for the temperature of the heater to drop naturally, and then turn it on for use.

　　Reason 2: Automatic power failure due to dumping

　　The current air heaters are generally equipped with automatic power-off protection for dumping. When the machine tilts more than 30 °, the power supply will automatically turn off and stop heating.

　　Suggestion: Put the heater in a stable place and then power it on.

　　Reason 3: Capacitor or motor is broken

　　If there is something wrong with the capacitor and motor of the heater, the heater will certainly not work and will not make heat.

　　Suggestion: Replace the capacitor and motor, or go to a professional repairman for maintenance.

　　Reason 4: Circuit failure

　　After the heater has been used for a long time, the lines and plugs are prone to aging and short circuit. At this time, the heater stops heating, and there is a risk of electric leakage.

　　Suggestion: Carefully check the wires and power supply. Check whether the above conditions exist, and then go to find professional maintenance personnel for maintenance.

　　Reason 5: Air outlet filter screen is blocked

　　After the heater has been used for a long time, because the air environment is too dirty, too much dust has accumulated at the air inlet, so that the hot air can not come out smoothly, so it can not be heated normally.

　　Suggestion: There is a filter screen at the air inlet of the heater. Take it down and clean it to eliminate the fault.