How to use an aroma diffuser

　　1. The water adding process of the aroma diffuser should be powered off, and there should be no water source and open fire around to avoid pollution or fire caused by the volatilization of essential oils.

　　2. Lift the upper cover of the aroma diffuser vertically, and check whether the upper cover is in good condition and clean.

　　3. Due to the different water quality, you should observe whether there is scale on the bottom of the aromatherapy machine before each use. If there is, wipe it with alcohol wipes to avoid blocking the fog generator.

　　4. After cleaning, add water first, pay attention to the warning of adding water, and do not exceed the upper limit of the water level.

　　5. The aroma diffuser should be leveled before adding water, and it should not be tipped or tilted, and it should be kept away from electronic equipment.

　　6. Prepare essential oils and plenty of water.

　　7. When adding water, add it slowly, be careful not to spill the water on the outside, especially the outer wall of the aromatherapy machine.

　　8. After reaching the water level, add 3-5 drops of essential oil to the water without stirring, the two will be mixed when the aroma diffuser is atomized.

　　9. After adding the essential oil, close the upper cover and place the aromatherapy machine on a flat area on the countertop.

　　10. Press the aerosol button, and after a few seconds, steam will be ejected.

　　11. Press the aerosol button again to switch the working time of the aromatherapy machine.

　　12. Press the light button to turn on the night light mode, continue to press the light button to switch the brightness.

Read recommendations:

A3 aroma diffuser.essential diffuser

H02 mini fan heater Heater Fan

What are the common misunderstandings of air purifiers.Car Air purifier

portable air purifier wholesale

ultrasonic diffuser direct sales