The correct way to install the cooling fan on the bracket.mini fan Manufacturing

　　In the process of assembling a computer, each component needs to be linked in the correct way, so as to ensure the normal operation of each component. Stand cooling fans are no exception. However, due to the special structure, the bracket cooling fan is more complicated to install than the general cooling fan. So how should the bracket cooling fan be installed?

　　The cooling fan of the computer CPU has a copper tube. How to install the copper tube fan for the computer CPU, the installation method of the CPU copper tube radiator can refer to the following experience.

　　1. When installing this kind of copper tube fan on the CPU, prepare all the components to be used one by one. If the copper tube fan base has a protective film, you must first tear it off; the main components are the fan bracket, The staples, nail tips and copper tube fan body are as shown below.

　　2. Take out the bracket of the fan first, and compare the positions on the four fan-specific bracket holes next to the CPU, as shown in the figure below; this bracket hole has several small card slots, mainly due to different CPU, and the hole card slot used will be different, so look carefully.

　　3. After the hole position of the CPU copper pipe fan is relatively accurate, the first step is to insert the clip into it. It should be noted that the card slot on the hole position should not be inserted wrongly, as shown in the figure below, which is used for this kind of CPU. , then the card nail is inserted into the first card slot.

　　4. Insert the four clips into the fan bracket slot accurately, and make sure that they are also inserted into the CPU fan bracket hole on the motherboard, and then insert the clip pins into the clips, as shown in the figure below.

　　5. After the nails are fully inserted, the protruding nails on the back of the motherboard will be stretched, as indicated by the arrows in the figure below; in this way, the copper tube fan can be fixed on the motherboard.

　　6. Now, take out the thermal paste, squeeze some on the CPU, as shown in the figure below, and spread it evenly; but the more thermal paste is squeezed, the better.

　　7. Before installing the copper tube fan on the bracket, it is necessary to know which side the air inlet side of the fan body is. The fan in the picture is the air inlet from the memory side, and then the air with heat is exhausted from the case hole. .

　　8. Then align the main body of the copper tube fan on the bracket, and let the hanging hole on one side of the fan hang on the bracket below, and then press down the pressure handle on the other side to hang it too. The lower bracket hook, as indicated by the arrow in the figure below.

　　9.9

　　Finally, plug in the power supply of the CPU copper tube fan, so that the CPU copper tube fan is installed, as shown in the photo below.

Read recommendations:

A8 Flame Aroma Diffuser

F16 desk fan Cooling Fan

What is the effect of the air disinfection machine in purifying oil fume?

F11 Cooling Fan

mini air purifier