CREATIVITY CHANGES YOUR LIFE

Tel: +86 0755-84870739

Email: info@nexhc.com

Home  >  News  >  Optimization dedicated

News

Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |

portable air purifier.The correct installation method and precautions for constant temperature and humidity machines

source:Optimization dedicated    release time:2023-12-22    Hits:     Popular:aromatherapy diffuser direct sales

  

  Constant temperature and humidity machines are mainly used in places with high environmental requirements, such as various libraries, laboratories, archives, museums, computer rooms, central control rooms, cultivation rooms, etc. The selection and installation of constant temperature and humidity units is a knowledge. Below, I will introduce the correct installation method and precautions.

  Installation prerequisites

  Check if there is a place to place the seat unit where a constant temperature and humidity machine needs to be installed. If available, you will need to find a bricklayer to level the ground in the designated placement area. If the company needs to make a constant temperature and humidity machine, there is not enough space to place it. Then you need to install a ceiling mounted constant temperature and humidity device. The first thing to consider is whether the ceiling can withstand a weight of several hundred kilograms. This requires the company to locate the property and inspect the range of each square meter floor. A typical industrial factory can withstand several hundred kilograms, which is not a big problem.

  Outdoor units should be selected in areas that are easy to install, easy to maintain, and well ventilated.

  Issues to pay attention to during installation

  1. The four corners of the constant temperature and humidity unit must be padded with shock-absorbing rubber pads, with a thickness of about 3cm. This can reduce the impact propagation during device operation.

  2. The outdoor fan must be an axial flow rotor fan and is not suitable for connecting to air ducts. The outdoor unit must be as close as possible to the indoor unit to reduce the number of bends in the refrigerant pipeline transportation

  3. Before installing the indoor unit, the floor must be checked. If the ground is flat, it is acceptable. If it is uneven, it needs to be negotiated with the customer. Because the ground level can ensure that all fasteners of the unit are evenly stressed. The external drainage pipe should first be connected to a U-shaped water distributor for constant temperature and humidity air conditioning, and ensure that there is a slope of no less than 5% along the water flow direction to ensure the smooth discharge of condensate.

  4. The air duct can use phenolic insulation pipes, which are lightweight, constant temperature and humidity wine cellar machines, easy to install, and accelerate the construction period. The air duct is connected to the outlet flange of the unit using thick canvas soft connection to reduce the vibration transmission of the unit and prevent the air duct from shaking due to the unit. Causing damage.

  5. At least three air outlets should remain open in all air supplies. The length of the air supply duct should be determined based on the residual pressure of the unit for the constant temperature and humidity wine cellar machine, and the number of air supply outlets should be reasonably arranged according to the indoor air flow rate.


Read recommendations:

F12 Cooling Fan

A17 Aroma Diffuser

What is the function of the aromatherapy machine.essential oil diffuser

mini fan direct sales

F11 Cooling Fan

Latest news

Hot

Inquiries

Contact the following for inquiries regarding our services and products.

Inquiry form