Why do non-woven workshops use industrial humidifiers?

　　Why do non-woven workshops use industrial humidifiers? The main function of industrial humidifiers is to humidify, that is to say, because the air humidity in the workshop is not enough, the non-woven workshop will need a humidifier. So, is it necessary to install a humidifier because the relative humidity of the air in the non-woven workshop is not enough to have a negative impact? The answer is yes.

　　The problem of static electricity that is easily generated during the production of non-woven fabrics is caused by air drying. When the air humidity is too low, the moisture content in the air is too low when the textile fiber and the card clothing are in contact, which will cause static electricity and other phenomena. At the same time, the non-woven fabric produced is relatively rough and does not feel smooth. It is understood that when there is no oil on the fiber, there is no antistatic agent on the fiber. Because the moisture regain of polyester wool at this time is only 0.3%, and the antistatic agent is lacking, it is easy to cause static electricity during production. The moisture regain and the relative humidity of the air are closely related, so it is particularly important to humidify the non-woven workshop.

　　The high-pressure micro-mist humidifier has high humidification intensity, uniform humidification and high humidification efficiency. It is an industrial humidifier with high cost performance. Moreover, the proportion of material weight gain is low, and the cotton will not be wet; energy saving, power saving, stable structure, acid and alkali resistance of the shell, and long service life; it can be adjusted and installed according to the production conditions and processes of the non-woven workshop, and the equipment can automatically adjust the accuracy High, the accuracy is within ±5%RH; the equipment is fully automatic controlled and unmanned operation, the product is equipped with a sensitive humidity sensor, and the computer LCD intelligent display shows the humidity; it has an automatic water-free protection function and overflow function; energy saving and environmental protection, adding tap water is Can be used directly.

　　In addition to being used in textile workshops, high-pressure micro-mist humidifiers are also widely used in electronics, metallurgy, spraying, printing, computer rooms, landscape fogging, etc. industrial humidifier.

Read recommendations:

H04 Heater Fan

A5 Aroma Diffuser

Air purifier radiation?

electric fan Production

aroma diffuser manufacture