Why do ceramic drying rooms also need to install industrial humidifiers?

In the glaze application process and green body forming process of ceramic factories, the humidity has a great impact. In order to maintain the humidity value required by the ceramic process, the ceramic industry

Industrial humidifiers will be installed in drying rooms. The ceramic body is usually placed in a drying room for drying, and the drying room mainly uses humidified hot air for drying. humidification

The humidification system for hot air drying uses water high-pressure nozzle for atomization, and the system needs to be equipped with a water pressurization system. In order to prevent the water atomization nozzle from plugging

Water purification system. The ceramic grouting molding requires that the temperature is generally controlled at 25 ℃ - 37 ℃ and the humidity is about 50% - 70%. Exothermic temperature

It is easy to make the gypsum mold too dry and overheated, and the gypsum mold is too dry and overheated. If the humidity is too low or uneven, the drying speed of the green body will be compared

Slow, which will affect the normal progress of the next process. On the contrary, if the humidity is too high, the drying speed of the green body will be accelerated, and the shrinkage speed will also be accelerated

It is easy to crack, especially in the parts where stress concentration is concentrated for products with complex molding. Therefore, the ceramic industry is in the process of grouting and drying

The environmental humidity control shall be done well in the process and glazing process. Therefore, an industrial humidifier will be installed for humidity control

As far as other industrial humidifiers are concerned, they feature large humidification capacity, accurate intelligent control of humidification, small atomized particles, and no nozzle blockage or water dripping

There is no need for manual protection, the maintenance is simple, and the comprehensive performance is high. Therefore, many ceramic industry drying rooms use industrial humidifiers to wet

Degree control.

Read recommendations:

A5 Aroma Diffuser

A21 Aroma Diffuser

Talking about the fragrance system of shopping malls

K7 Car Air purifier

aroma diffuser wholesaler