Where is the industrial humidifier installed in the workshop?

　　Generally, when the workshop is too dry and the humidity is low, an industrial humidifier is used to humidify, cool, remove dust and remove static electricity. As for where it is installed in the workshop, it is related to the type, area and type of humidifier.

　　The ultrasonic humidifier is installed on the wall of the area that needs to be humidified, and is fixed on the bracket, but it should be horizontal, and there are no obstacles around the device, especially within the spray distance in front of it, to prevent condensation of water mist, damage the device, or cause water on the ground. In addition, there should be no accumulation under the equipment, and the height is generally about 2 meters.

　　In fact, many workshops are using ultrasonic humidifiers, especially for textiles, electronics, preservation of fruits and vegetables, and more.

　　What should I pay attention to when ultrasonic and installing ultrasonic humidifier?

　　Pay attention to the stability of the pressure of the equipment. When choosing to use water, tap water or other drinking water can be used. At the same time, pay attention to the distance between the water source and the power supply about 2 meters from the equipment.

　　The ultrasonic humidifier has a large amount of humidification, a wide range of humidification, can be adjusted, and can automatically control humidification and constant humidity.

　　3. The spray particles of the equipment are small, 1-10um, which can effectively humidify, cool down and remove dust.

　　Pay attention to the level when installing the equipment, otherwise the equipment is prone to failure during operation.

Read recommendations:

TS04

F07 Cooling Fan

One-time removal of aldehydes and air purifiers, which one should you choose?Air purifier Merchant

mini aroma diffuser car

aroma diffuser Manufacturing