Where are the industrial humidifiers installed in the factory?

　　Where are the industrial humidifiers located on site? Generally, the on-site factory is too dry, and when the humidity is low, an industrial humidifier is used to humidify, cool down, remove dust, and remove static electricity. Where it is installed on site is related to the type, site area, and type of the humidifier.

　　The ultrasonic humidifier is set on the wall of the area that needs to be humidified and fixed on the bracket, but it needs to be level, and there are no obstacles around the equipment, especially within the spray distance in front, to prevent fog condensation, damage to the equipment, or water on the ground. In addition, there should be no accumulation under the equipment, and the height is generally about 2 meters.

　　In fact, ultrasonic humidifiers are used in many fields, especially in textiles, electronics, and the preservation of fruits and vegetables.

　　What should be paid attention to when installing an ultrasonic humidifier?

　　1. Pay attention to the stable pressure of the equipment. When using water, tap water or other drinking water can be used. At the same time, pay attention to the water source and power supply about 2 meters away from the equipment.

　　2. The ultrasonic humidifier has a large amount of humidification, a wide range of humidification, can be adjusted, and can automatically control humidification and constant humidity.

　　3. The spray particles of the equipment are small, 1-10um, which can effectively humidify, cool down and remove dust.

　　4. Pay attention to the level when installing the equipment. Otherwise, equipment operation is prone to failure.

Read recommendations:

F21 Cooling Fan

A14 Aroma Diffuser

Analysis of purification principle: the truth that merchants will not tell you

mini humidifier direct sales

aroma diffuser direct sales