What should I pay attention to when debugging for the special humidifier host of the textile factory?

　　The emergence of a special humidifier for textile factories can be said to fill a vacancy with high humidification efficiency and low dust reduction costs. The equipment is now widely used in major textile factories. For different types of factors, what should I pay attention to when performing equipment hosting? Follow the editor to find out.

　　1. Check whether there are foreign objects in the water tank;

　　2. Check whether the liquid level switch is installed;

　　3. Check the water quality in the water tank;

　　4. Check whether the components of the special humidifier host of the textile factory are loose and destroy (consider the impact of the transportation process);

　　5. Is the conjunction of the water pump too tight? The specification model of the lubricating oil of the pump (SAE15W-40/50) is whether the amount of oil meets the requirements;

　　6. Is the voltage normal and whether the wiring is correct;

　　7. Check the startup, the stop button is sensitive, will the indicator light be on after the launch, whether the liquid level switch works;

　　8. Close all the water outlet valves, turn on the water return valve, connect the power supply, and operate the host for 20-30 minutes at low speed, so that the pump can be fully debugged, and then gradually turn on each valve to debug. Each debugging time is about 10 minutes;

　　9. If the operator fails to operate according to the above process, the special humidifier of the textile factory will be borne by the destruction. The customer must operate the correct operation according to the instructions.

Read recommendations:

H01 table fan Heater Fan

J1 water humidifier Air Humidifier

Use the aroma diffuser to make your home fragrant

aroma diffuser manufacturer

aromatherapy diffuser company