What should I do if the high-pressure micro-mist humidifier fails to start normally?

　　When using a high-pressure micro-mist humidifier, it is inevitable that there will be some unavoidable failure problems. Even if the high-pressure micro-mist humidifier is used in a completely correct and standardized operation, sometimes the high-pressure micro-mist humidifier cannot be started normally. , then what should I do if the high-pressure micro-mist humidifier fails to start normally?

　　1. The power supply is not connected: the power switch on the high-voltage micro-mist humidifier is pressed, but the power socket is not connected well, this is very simple, just turn on the power again. Of course, the loose wiring inside the high-pressure micro-mist humidifier is also a reason.

　　2. Temperature sensor problem: the current high-voltage micro-mist humidifier has its own fault detection function. If the power supply is turned on, but the high-voltage micro-mist humidifier still does not work, then check the display on the display board of the high-voltage micro-mist humidifier. If it shows E1, it means that there is a problem with the temperature sensor, and if it shows E2, it means that there is a problem with the humidity sensor.

　　What should I do if the high-pressure micro-mist humidifier fails to start normally?

　　3. The parts of the high-pressure micro-mist humidifier are damaged, and it is necessary to ask professionals to replace the parts;

　　4. There is a problem with the internal circuit of the high-pressure micro-mist humidifier, which needs to be returned to the factory for maintenance.

　　It is actually quite common that the high-pressure micro-mist humidifier cannot be started normally due to the problem of the humidity sensor. At this time, it is only necessary to replace the new sensor and it can be repaired. However, it should be noted that the internal structure of the high-pressure micro-mist humidifier is very complicated. Therefore, if the high-pressure micro-mist humidifier cannot be started normally, please do not disassemble it yourself. It is recommended to find professional personnel for maintenance!

Read recommendations:

F13 Cooling Fan

TS04

An odorem diffundit tutum?

usb humidifier Manufacturing

humidifier aroma diffuser