What is the correct method of using a humidifier.diffuser humidifier mini

　　1. First, place the humidifier in the room where it is to be used, open it and check to see if there are any missing components. Follow the instructions for opening the humidifier for the first time.

　　2. Rotate and open the bottom half of the humidifier, slightly add a certain amount of water. Do not add too much water, and it is best to use purified water to reduce impurities in the water.

　　3. Install the container for adding water and the upper half of the humidifier, and be sure to install it properly to prevent water leakage during movement.

　　4. Next, connect the humidifier to the power supply. It is recommended to use an original data cable to connect. You can use a charging head to connect to the power supply or directly plug it into a computer or other device.

　　5. Click to turn on the switch of the humidifier. Different humidifiers have different modes. Press it once to spray humidified water mist continuously. Press it again, the spray will be automatically interrupted for a while, and then continue spray.

　　6. The effect of spray will be affected by many factors. Try to keep the surrounding area free of wind. The water used should be pure water as much as possible, so the humidification effect will be better.

　　7. Finally, there is the cotton swab inside the humidifier. After using it for a period of time, remove the plastic shell outside the cotton swab and replace it with a new one to continue using it.

Read recommendations:

L06 Night Light

J16 Air Humidifier

Which is safer, the key components of the air disinfector or the air purifier

desk fan Production

table fan manufacture