CREATIVITY CHANGES YOUR LIFE
Tel: +86 0755-84870739
Email: info@nexhc.com
Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |
source:Optimization dedicated release time:2023-09-04 Hits: Popular:aromatherapy diffuser direct sales
1. The humidifier is windy without fog, and when running tap water for a long time, the lingering scale causes water and alkali to form on the vibrating plate, making it unable to operate normally. As a result, the fog naturally decreases or cannot be sprayed out.
Solution: Using household white vinegar with some salt can effectively dissolve water and alkali, and the mist will gradually spray out. Be careful not to use strong acids, which are not conducive to maintenance and pose safety risks.
2. There is a problem with the humidifier atomization plate.
Solution: Turn over the bottom cover to check whether the fuse (safe) is broken. If it is safe, try to adjust the potentiometer on the circuit board. Turn it clockwise for a quarter of a turn and try it. If it is still not spray, replace the atomizing piece, that is, a "metal" round piece with a diameter of about 20-30 mm that is directly opposite the nozzle. This is a transducer. It cannot be scratched with hard objects during treatment. If the metal coating falls, the transducer cannot operate normally, The fog cannot come out and needs to be replaced.
3. Understand the misconceptions. Nowadays, there are ultrasonic humidifiers and purification humidifiers for mainstream humidifiers. The ultrasonic humidifier undergoes high-frequency oscillation of the ultrasonic wave to atomize water into 1-5 microns of ultrafine particles, which are then sprayed out by pneumatic equipment and evenly dispersed into the air, achieving the function of humidification. This type of humidifier emits water mist.
Structural design requirements for attic shelf platforms
The attic shelf platform fully considers humanized logistics, with beautiful design and generous structure. Easy to assemble, install, and disassemble, and can be flexibly designed according to on-site conditions. The floor design can be customized according to various installation conditions, and can be easily assembled on site without welding. The design of the attic shelf platform needs to consider the volume of the warehouse, as well as the volume, weight, and size of the goods, whether forklifts are easy to load and unload, whether the impact of forklifts will damage the shelves, and seismic strength.
The design of the attic shelf platform is beautiful and the structure is simple. Easy to assemble and disassemble, and can be flexibly designed according to on-site conditions. Forklifts, lifting platforms, cargo elevators, and other methods can be used to lift goods up and down stairs. Suitable for situations with high warehouses, heavy goods, large demand spans, and large storage capacity. It can fully utilize space and save warehouse area. The space is flexible in use, and the upper space can be used as storage or office space, widely used in electronics, hardware, communication, printing, etc.
The design of the attic shelf platform needs to consider usage requirements, loading properties, whether it can meet all the requirements for storing goods, whether assembly is convenient and fast, and whether loading and unloading of goods is simple and feasible. And whether the size and clearance of the shelves can meet the needs of the warehouse. The testing of whether the pressure resistance, fire resistance, and shock resistance meet the existing conditions of the warehouse. The locking device of the shelf is considered based on the category of stored items, such as bolt locking or screw fastening. If there is any damage, whether replacement is convenient and fast.
In addition, the attic shelf platform should be fixed on a concrete foundation. The shelves and floors should be fixed to the ground through embedded parts or chemical bolts, which requires design for different loft shelf platforms because loft shelf platforms require a large load, and fixing to the ground helps to maintain platform stability and prevent tilting. In addition, it also helps to prevent vibration and can cope with the impact of loading and unloading machinery on shelves.
The attic shelf platform also needs to have eye-catching signs set up according to the type of goods, so that staff can check for leaks and fill gaps. The area of each label should not be less than 20 square centimeters, and the clarity and color of the font should be set according to the maximum unit load. The maximum load mark (kg) for each floor, the maximum allowable load, and the number of unit loads allowed to be stored in each cargo hold.
Read recommendations:
What is the reason why the humidifier does not produce fog.mini portable humidifier
NextHow to use an indoor humidifier.humidifier diffuser Processing
Popular recommendation
TS01
2022-02-17TS02
2022-02-17A8 Flame Aroma Diffuser
2022-04-19A16 Aroma Diffuser
2021-09-14A23 Aroma Diffuser
2021-09-14Do small fans generally use brushless motors or brushed motors?
2021-12-28Talking about the Four Hazards of Indoor Air Pollution to Children.Home air purifier sales
2021-11-16Detailed explanation about the workshop purifier
2022-01-12Demystifying the scent whispers in the lobby of a five-star hotel
2022-05-05Can an air purifier remove formaldehyde? how to choose?mini air purifier
2021-11-24Does the humidifier emit radiation
2024-09-28Is using a humidifier at home harmful to the body?
2024-09-09How long does a dehumidifier usually run per day?
2024-09-09Humidifier classification
2024-08-24Humidifiers nourish daily life
2024-08-17Common classification methods for humidifiers
2024-08-10How to dehumidify with a dehumidifier
2024-07-22Working process of dehumidifier
2024-07-22High pressure micro fog humidifier for air conditioning unit
2024-07-13What are the possible reasons why humidifiers do not produce fog
2024-07-08Contact the following for inquiries regarding our services and products.