Performance standard for electric heating humidifier.mini humidifier manufacturer

　　The first is the amount of humidification. This is the most important parameter of the humidifier. In order to cater to the psychology of consumers to pursue the pursuit of a large moisturizing amount, it is randomly marked with the amount of humidification. Therefore, the standard strictly stipulates that the amount of humidification should not be lower than the nominal value of the product rated humidification.

　　The second is humidification efficiency. Refers to the actual humidifier and the ratio of the input power of the humidifier, which reflects how much humidification can be generated by the unit power consumption, which is an important indicator for measuring the quality of the humidifier. In order to guide consumers to buy energy -saving and environmentally -friendly products and promote more efficient products for enterprises, the standards divide the indicators into four levels: A, B, C, and D.

　　The third is noise. Considering that the humidifier may be used in the bedroom, if the noise will have a certain impact on consumers, the standard has strictly limited the noise indicators.

　　The fourth is the service life of the evaporation core (device). For direct evaporate humidifiers, the evaporation core (device) is the most impact on performance. With the continuous use of the humidifier, the efficiency of the evaporation core (device) will continue to decrease, and the amount of humidification will continue to decline. The standard stipulates that when the humidifier's humidifier is reduced to 50%of the initial humidification, it is deemed to have an evaporation core failure. For the replaceable evaporation core (device), the service life should not be less than 1,000 hours.

　　Fifth, for many humidifiers with auxiliary functions such as softening water and humidity display. In order to prevent certain products from not having this function, or this function cannot play a corresponding effect, it is possible to mislead consumers through false publicity methods. The standard also puts forward specific requirements for these auxiliary functions: For the soft water heater, the standard stipulates that the hardness of the water should not exceed 100mg/L after softening through the soft water heater. Before failing, the total water softening should not be less than 100L. For humidity display, it is stipulated that within the range of a relative humidity of 30%to 70%, the error of the humidity display should be within ± 10%, so as not to be misleading by consumers. In addition, the standard also stipulates that because the water level will have a significant impact on the performance of certain humidifiers, the humidifier should have the function of water level protection to prevent consumers from being low -performance and inefficient for a long time without knowing it. Working status.

Read recommendations:

F23 electric fan mini fan Cooling Fan

A25 aroma diffuser.essential diffuser

Counting the evolutionary history of air purifier filters.mini air purifier

air humidifier Manufacturing

F07 Cooling Fan