Industrial humidifier starts for the first time.usb humidifier Manufacturing

　　After the equipment is installed stably, the power supply for the equipment shall be allocated according to the power consumption on the equipment nameplate, and a certain power margin shall be reserved. The power supply is unidirectional

　　220V/50H, and there should be good and reliable protective grounding wire to ensure the safety of equipment use. It is forbidden to open the electrical box cover at will at ordinary times. It is really necessary to open the electrical box cover

　　Turn off the power supply and disconnect the power plug to ensure the safety of personnel and equipment.

　　To ensure that the equipment produces clean negative ion water mist and reduce the content of calcium and magnesium particles in it, it is recommended that you use softened water or purified water, especially for food and printing

　　Softened water or purified water must be used in brushing, painting and other industries, as well as other occasions with static electricity. After the water supply and power supply circuits are connected, the power can be turned on

　　Close, manually control the series equipment to start water filling, and start spray after reaching the specified water level. For program or automatic control series equipment, humidity sensing

　　The sensor probe (the sensor probe shall be shockproof) shall be installed at the proper position of the humidification place to control humidity, and then the sensor shall be connected to the equipment humidity control after the sensor wiring is fixed

　　On the socket, set the controller, and the device starts to work. See the attached instructions for the specific setting method.

Read recommendations:

H01 table fan Heater Fan

L03 Night Light

Air purifier filter technology introduction.aroma diffuser

mini fan Factory

electric fan wholesaler