CREATIVITY CHANGES YOUR LIFE

Tel: +86 0755-84870739

Email: info@nexhc.com

Home  >  News  >  Optimization dedicated

News

Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |

Frequently Asked Questions about Industrial Ultrasonic Humidifiers.air humidifier direct sales

source:Optimization dedicated    release time:2022-09-15    Hits:     Popular:aromatherapy diffuser direct sales

  J1 water humidifier Air Humidifier

  Industrial ultrasonic humidifiers are more and more widely used in the industrial field. Among industrial humidifiers, ultrasonic industrial ultrasonic humidifiers use high-frequency changes in ultrasonic waves. The ultrasonic industrial ultrasonic humidifier has high compressive strength, uniform humidification, high humidification efficiency, environmental protection and energy saving, long service life, environmental protection and humidity balance, and independent maintenance without water. The industrial ultrasonic humidifier is also called an electric heating industrial ultrasonic humidifier. The principle is to heat the water in the heating body to 100 degrees to generate steam, which is transported by a centrifugal fan. Therefore, the electric heating industrial ultrasonic humidifier is a very simple humidification method. The disadvantages are high power consumption, no air-fuel, low safety performance, and simple calibration of electric heaters.

  Then, according to the Industrial Humidifier FAQ, start the application after 30 minutes at room temperature;

  1. Do not touch drinking water with dirt, oil, acid or alkali. Humidify to industrial ultrasonic humidifiers. Continuously clean the sensor surface to keep the environment clean;

  2. The atomization control module and the inner cavity of the shell in the storage tank of the industrial ultrasonic humidifier should be cleaned in time, generally once every 2-3 months;

  3. When the software of the industrial ultrasonic humidifier system is not used, the unnecessary water in the storage tank should be discharged to avoid long-term leakage and foam as the atomization control module, speed up the embrittlement speed of the industrial ultrasonic humidifier, and endanger the its service life.

  4. When the equipment is used for a long time, if the above treatment still cannot solve the problem, please disassemble and replace the energy chip or make an atomization control module.


Read recommendations:

J21 Air Humidifier

F16 desk fan Cooling Fan

Tips for using and buying a USB humidifier

air humidifier Processing

car aroma diffuser

Latest news

Hot

Inquiries

Contact the following for inquiries regarding our services and products.

Inquiry form