Circular Wet Film humidifier.humidifier diffuser direct sales

　　The use of wet membrane materials for humidification belongs to the clean and humidity. The work process is that the clean tap water enters the circulating water tank through the water pipeline and controls the water level through the floating ball valve. The water heater on the top of the device, the water heater ensures that the water is evenly distributed on the wet membrane material, and the water penetrates down from the top of the wet membrane material. At the same time, it is absorbed by the wet film material to form a uniform water film. When the dry air passes through the humidifier, part of the water contacts vaporization and evaporation with the air to make the air humidify (that is, the increase in humidity) to achieve the purpose of humidification; Repeated cycle of circulating water pump.

　　When the water level in the circulating water tank decreases, the water inlet switch is turned on, and the water tank is hydrated to ensure that the water level of the water tank is maintained in the set height range; when the water level in the circulating water tank drops to a certain height, the low water level sensor in the water tank in the water tank is Work to ensure that the circulating water pump stops running without water. When the water cycle in the circulating water tank is circulated for a certain period of time, the water is discharged through the drainage port of the water tank, the water tank is cleaned, and the clean water is replaced to ensure that the circulating water and the humidified air are not polluted by secondary.

Read recommendations:

TS06

F13 Cooling Fan

What technology does a good air purifier need? (2)Air purifier Production

electric fan Manufacturing

aroma diffuser Factory