How to wire the ultra-thin cooling fan better.mini fan heater Manufacturing

　　Ultra-thin cooling fans can be seen in many machines. The function of the ultra-thin cooling fan in the machine is to effectively cool the machine and ensure the normal operation of the machine. However, the ultra-thin cooling fan may be in an awkward position in the machine. At this time, the wiring of the ultra-thin cooling fan becomes a particular concern. So how to wire the ultra-thin cooling fan better?

　　Ultra-thin cooling fan is a cooling device widely used in communication products, consumer electronics, automotive electronic equipment, medical equipment, heaters, ATMs, car freezers, induction cookers, audio equipment, environmental protection equipment and other instruments and equipment. According to the introduction of ultra-thin cooling fan manufacturers, the working principle of ultra-thin cooling fans is realized by energy conversion, namely: electrical energy → electromagnetic energy → mechanical energy → kinetic energy. Its circuit principle is generally divided into various forms, and the performance of the fan will be different depending on the circuit used. Last time I introduced the types of ultra-thin cooling fans to you, so today I will share with you how to wire the ultra-thin cooling fans.

　　The wiring steps of the ultra-thin cooling fan:

　　1. Identify the type and model of the ultra-thin cooling fan, and identify whether the lugs used in this product are in line with the required products.

　　2. Identify the wire diameter of the enameled wire, whether it is consistent with all the required specifications, and the lug cannot be placed on one side of the corner enameled wire.

　　3. Turn on the power switch of the ultra-thin cooling fan, and check that the model displayed on the machine must be consistent with the winding product.

　　4. Pass the enameled wire out of the winding slot, into the cutting edge, and insert the stator into the mold.

　　5. According to the running direction of the fan blade, distinguish the positive and negative of the lugs on it.

　　6. Take the wound nails out of the mold, check whether there is a single wire exposed in the wire groove, and then reshape them into the plastic frame.

　　7. After the above wiring steps are completed, you can turn on the start switch to check the operation of the ultra-thin cooling fan.

　　The wiring steps of the ultra-thin cooling fan are shared here. From the above content, we can know that its wiring method is not difficult. In addition, we should pay special attention to the fact that the wrong enameled wire cannot be used when wiring. Pay attention to its stability when putting it into the wire trough, and the wire cannot run out of the wire trough.

　　Generally, small DC ultra-thin cooling fans are relatively small and are mostly used in the home appliance industry, machinery industry, manufacturing equipment industry and other products with ventilation and heat dissipation requirements. It mainly solves the problem of heat dissipation of the equipment, reduces the working environment temperature of the equipment, and prolongs the service life of the equipment. However, there are also some devices that use the air volume and air pressure of the ultra-thin cooling fan to complete the function of the device. For example, the air ball table uses the pressure of the fan to make the ball drift on the table surface. Operating in harsh environments such as high temperature, heavy dust, and humid air requires an all-metal fan with high temperature resistance and dust-proof and moisture-proof functions. This small DC ultra-thin cooling fan is relatively expensive due to its high technical requirements.

Read recommendations:

F23 electric fan mini fan Cooling Fan

K7 Car Air purifier

Some knowledge of Air purifier

electric fan Processor

aroma diffuser Vendor