What should I do if the ultrasonic industrial humidifier has a small amount of fog and no fog?

　　The ultrasonic industrial humidifier uses the high-frequency vibration of the atomizing plate in the atomizing sheet to make the water spray into ultra-fine particles, and then diffuses the water mist into the humidifying environment through the fan, so as to play the role of humidification. Because the ultrasonic industrial humidifier has the advantages of simple operation, small size, small atomized particles and high humidification efficiency, it is widely used in many industries, especially factories or enterprises with high humidification requirements.

　　We all know that no matter what kind of machine, there will inevitably be losses during use, and the humidifier in the ultrasonic industry is no exception. If there is little or no fog when using the ultrasonic humidifier, what should I do? Let's talk.

　　Ultrasonic humidifier atomizing plate

　　1. Too much water in the ultrasonic humidifier water tank

　　Too much water in the humidifier water tank will cause the water level to be too high. If the water level is too high, it will cause serious aggregation and collision of water mist. The water mist will quickly condense into water droplets, and the amount of mist will naturally be greatly reduced. Generally, the water level exceeds the sensing probe on the atomizer plate.

　　2. Too much scale on the atomizing plate

　　Due to the long use time, the atomizing plate will produce scale, and the scale will accumulate to a certain extent, which will block the atomizing plate and reduce the mist volume of the humidifier. Therefore, it is necessary to regularly clean or replace the atomizing plate and mist during use. If it is caused by poor water quality, it needs to be replaced with a new water source.

　　3. The circuit board fuse is damaged

　　After the ultrasonic humidifier is used for a long time, if the fuse is damaged or lost, it will also cause a small amount of fog, so replacing the fuse with a new one can solve the problem.

　　4. The atomizing sheet is broken or worn

　　The atomizing plate and the atomizing plate on the atomizing plate have a certain service life. Under the working state of high frequency vibration, the atomizing plate will be broken and worn for a long time, and the amount of fog will naturally be greatly reduced. . In this case, just replace the new atomizing plate or atomizing plate to solve.

　　Ultrasonic humidifier keeps vegetables fresh

　　Generally speaking, the low fog or no fog of the ultrasonic industrial humidifier is mainly caused by these reasons. During the use process, attention should be paid to regular maintenance of the machine and timely replacement of maintenance parts, which can effectively prolong the service life of the machine.

Read recommendations:

J9 usb humidifier

A4 Aroma Diffuser

Summary of the steps to use the aroma humidifier.aroma diffuser Factory

air humidifier direct sales

aromatherapy diffuser wholesaler