What industrial humidifier is good for meltblown workshop?

　　Which industrial humidifier is good for meltblown workshop? Humidity in textile workshop is generally strictly controlled. Only the relative humidity of the air is reasonable, the yarn moisture regain is high, the toughness is strong, the phenomenon of flying flowers is less, and the production efficiency and product The quality has also been greatly improved. Conversely, if the humidity is not well controlled, it may suffer some losses than necessary, and the same is true for the meltblown workshop.

　　The main material for the production of melt-blown non-woven fabrics is polypropylene, which is used to produce medical supplies, which requires high quality. It is also necessary to use an industrial humidifier to control humidity during production and processing, increase the toughness of fibers, and improve product quality.

　　Melt-blown non-woven textile workshop humidifier is professionally used as an industrial humidifier in textile workshops. It has obvious air humidification, purification, dust removal and electrostatic removal. The high-quality melt-blown non-woven fabric produced in the workshop is not only used in the production of masks , It is also widely used in air, liquid filter materials, isolation materials, absorption materials, and oil absorption materials.

　　In the melt-blown workshop, there will be obvious static electricity phenomenon when the humidity is low. The main reason is that the fibers and the card clothing have less moisture and are dry, and static electricity is generated during the friction process. At this time, the humidification effect of the humidifier in the textile workshop is better. The humidifier can quickly control the humidity in the workshop between 60 and 70% RH to ensure production efficiency and product quality.

　　The advantages of high pressure micro mist humidifier are as follows:

　　1. The spray volume is large and uniform, and the humidification effect is obvious.

　　2, energy saving, low cost

　　3. The spray particles are small, no dripping, no clogging.

　　4. Imported parts are used, with low failure rate, tap water and well water can be used, and the service life is long.

　　5. Intelligent control, can automatically humidify, add water, constant humidity, or manually control.

　　6. Water shortage and power failure protection devices are installed.

Read recommendations:

TS04

F21 Cooling Fan

Air purifier air volume: not the bigger the better

water humidifier Processing

Car Air purifier price