Temperature and humidity control requirements for printing workshops.mini humidifier Vendor

　　When the ambient temperature changes by five degrees, the water content of the paper will change by 0.15%. In multicolor printing, when the water content of the paper changes by 0.1%, it will affect overprinting. In general, the ambient temperature change in the workshop should not exceed three degrees.

　　When the humidity changes by 10% (below 80%), the moisture content of the paper changes by 1%. When the relative humidity of the environment exceeds 80%, the moisture content of the paper changes by 1.5-2.0%. Therefore, we need to strictly control the changes in environmental humidity below 80%.

　　It is best for enterprises with conditions to ensure that the workshop temperature remains constant at 20 ℃ and the humidity is maintained at 55% -65%>

　　By the way, I forgot to say that whether it is a machine malfunction or an inappropriate process application, we must start the discussion on the premise that the printing plate is correctly installed. If the printing plate cannot be installed, it would be a bit absurd to start analyzing whether there are these faults.

Read recommendations:

F17 Handheld Mini Fan

J21 Air Humidifier

Introduction to the functional principle of aroma diffuser, exquisite life starts from now.aromather

aromatherapy diffuser wholesale

Home air purifier company