Installation techniques of ultrasonic humidifier

　　Ultrasonic humidifier is the most widely used in industrial production, is also the most common industrial humidifier equipment, with its simple installation, good humidification effect, humidification fast and convenient maintenance; Although the installation is relatively simple, but for different humidification environment must pay attention to some details, master some skills, to ensure the normal operation of the equipment and play the best humidification effect.

　　1. The maximum relative humidity of the required humidification environment is higher than 75%RH, and the ultrasonic humidifier should be installed outside the required humidification environment; The ultrasonic humidifier can be installed in the humidified environment when the maximum relative humidity is below 75%RH.

　　2. The required humidification environment has requirements for explosion-proof, and the ultrasonic humidifier should be installed in the non-explosion-proof area outside the required humidification environment.

　　3. If the temperature in the required humidification environment is lower than 0℃, the ultrasonic humidifier should be installed in the place where the temperature is higher than 0℃ outside the required humidification environment.

　　4. If there is more floating dust in the required humidification environment, which may cause the intake of the ultrasonic humidifier to work poorly, it should be considered to be installed outside the required humidification environment.

　　Ultrasonic humidifying machine according to the above conditions determine the installation position, the installation height of problem, should also be considered under normal circumstances, the equipment out of the fog port should be set on top of the humidifying places, less than 50 cm away from the top, and should, as far as possible to reduce the vertical distance out of the fog port to the device, in order to maximize the aerosol transmission efficiency, therefore, The ultrasonic humidifier should be installed as high as possible.

Read recommendations:

A16 Aroma Diffuser

TS03

Principle and structure analysis of air purifier to remove formaldehyde!Air purifier company

Air purifier Processor

Air purifier Production