If the humidifier doesn't spray, does it burn dry?

　　The humidifier is widely used in electronic factory, textile factory, printing factory, tobacco moisture regain, disinfection and sterilization, greenhouse planting, edible fungus cultivation, and storage preservation

　　And other fields. It is a common humidification equipment nowadays, among which the humidifiers are mainly ultrasonic humidifiers, industrial humidifiers, high-pressure micro mist humidifiers

　　Wet film humidifiers and industrial humidifiers are mainly used. Although there are many types of humidifiers, the humidifiers are easy to come out after being used for a long time

　　The current humidifier spray is smaller or even not spray. In general, this kind of situation is mainly caused by dry burning of humidifier

　　Yes? Of course, there are also other influencing factors. Today, we will focus on sharing the causes and solutions of humidifier dry burning.

　　Humidifiers are commonly used in ultrasonic humidifiers because of dry burning and no spray. This type of humidifier uses ultrasonic high-frequency vibration to atomize water to 1-5 microns

　　And then sprayed out by the fan and evenly diffused into the air, so as to achieve the effect of humidification. If there is no fog and only water column,

　　Then it can not humidify the air. This is mainly because there is too much water in the water tank, which usually occurs when it is just used,

　　Because the user did not know how to operate the humidifier, the water tank was full, resulting in a large distance between the water surface and the atomization hole. Just see

　　Water column, very little fog appeared. The other case is that the dry burning of atomizing plate is caused by insufficient water level in the water tank of the humidifier, because there is no water

　　As a result, the temperature of the atomizing plate increases, and the burning out occurs. Secondly, the water quality in the water tank is poor, such as mixing some

　　The oily liquid will cause the surface tension of water to be too large, so that the atomizer can not fully contact with the water. After a long time

　　Due to the increase of temperature, the transducer is dry burned. The treatment for dry burning of this type of humidifier is to replace the atomizer and atomize the dry burned humidifier

　　Replace the. Adjust the water level of the water tank and the water level of the buoy. For water quality, it is better to use purified water. If there is no purified water

　　Use tap water. As long as the water quality meets the requirements, the atomizing plate will not dry burn when working.

Read recommendations:

L05 Night Light

L06 Night Light

Why is the electric fan not working?electric fan company

aroma diffuser direct sales

Cooling Fan direct sales