Humidifier maintenance room temperature humidity automatic controller.ultrasonic diffuser manufacture

　　Temperature control range: 0--50 ° C temperature control accuracy: 20 ± 1 ° C temperature control range ≥90%(relative humidity)

　　Heating power: 3KW Quality and Power: <2KW (can be equipped with a cold air conditioner of less than 25 hp)

　　Moisturizing power: 60W power supply voltage: 220V ± 10%V power frequency: 50Hz

　　Dimensions: 500x285x900mm (controller) 350x420x600mm (host)

　　Applicable area: 20--60 square meters

　　1. This instrument consists of four parts: controller, large negative ion humidifier, stainless steel heating water tank and air conditioner (self -provided). The control of the temperature and humidity is automatically exchanged by the digital instrument without manual control.

　　2. Working principle

　　A. Temperature control: When the internal temperature of the maintenance is higher than the upper limit of the temperature control instrument, the control system outputs the refrigeration signal, and the external load of the air conditioner is over to the other. That is, heating, automatically restore to the constant temperature when the control requirements are met, so that the control purpose is repeatedly achieved.

　　B. Wet control: When the humidity of the maintenance room is lower than the control value, the control system outputs the humidifier signal, controls the host of the host humidifier, and automatically stops working after the interior meets the requirements.

Read recommendations:

A15 Aroma Diffuser

A14 Aroma Diffuser

Do air humidifiers clean the air?

aromatherapy diffuser manufacturer

mini fan manufacturer