Humidifier Contents

　　The industrial humidifier cleans all the humidifiers with high water content in the system, and fills the system with pressurized nitrogen to blow the system clean, then uses a vacuum pump to vacuum for about 20 minutes, and then adds the required number of humidifiers for the original machine, and runs for 30 minutes in cooling. Then stop the machine to vacuumize for 30min or more. After checking that the vacuum degree meets the requirements, fill the humidifier with an accurate amount, start it up and run it, and troubleshoot the problem.

　　When the machine is repaired, water vapor may enter the system or a humidifier with more water content may be filled. The elemental water is at the interface between the capillary tube and the humidifier. Due to the throttling and cooling of the humidifier, the temperature is lower than 0 °C, and the water is here. Formed into needle-shaped ice crystals, the ice crystals accumulated, and slowly blocked the capillary, the humidifier could not flow, could not dehumidify (refrigeration), and the compressor was shut down due to protection.

　　The air heats the capillary to melt the ice crystals, and the compressor resumes operation. Repeatedly, the dehumidifying effect becomes poor. After the humidifier was repaired, it was found that the noise increased, and there was no abnormality in the structure of the humidifier.

　　Now the product parts are all modular production, whether the company permanently provides technical support and parts industry for customers, this is what customers need to know. In addition to directly asking the manufacturer of the high temperature humidifier, you can also visit other users to understand the quality of the service.

　　Whether it has the ability to transform, different enterprises have different requirements for drying and humidification, so it is necessary to transform the high temperature humidifier to make it suitable for its own drying room. If the high temperature manufacturer can customize it according to user requirements, it can be explained The technical ability of the company is the object of cooperation.

Read recommendations:

F19 Cooling Fan

A21 Aroma Diffuser

When is the aromatherapy machine suitable for use.aromatherapy diffuser Factory

electric fan price

F11 Cooling Fan