CREATIVITY CHANGES YOUR LIFE
Tel: +86 0755-84870739
Email: info@nexhc.com
Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |
source:Optimization dedicated release time:2022-09-07 Hits: Popular:aromatherapy diffuser direct sales
How to use an industrial humidifier for electrostatic protection in an electronic workshop? Static electricity is very common in life, and many people have encountered it, and it has no effect on themselves. However, frictional electrification in some workshops may have an impact on production if not improved in time. Among them, the hazards in the electronic workshop are more serious than other workshops. How to do electrostatic protection in electronic workshop?
In fact, the occurrence of static electricity in the electronics workshop has a lot to do with the humidity of the workshop. The lower the humidity, the easier it is to generate static electricity, and the voltage is relatively high. Therefore, the protection of static electricity in the electronic workshop can be carried out by improving the humidity of the workshop.
However, for the humidity of the workshop, generally it should not be higher than 60% RH, and it can be kept between 40-50% RH. If the humidity is too high, it will damage the electronic components, cause their functions to be reduced, fail, and affect their use time. . This requires the electronic factory to configure the corresponding electronic workshop dry mist humidifier according to its own production needs, which can quickly humidify and control the humidity of the workshop within a certain range.
In addition, in addition to installing the electronic workshop dry mist humidifier, the electronic workshop can also refer to the following practices:
1. Pay attention to the cleaning of the soldering iron tip, the sponge in the tank is wet, and its grounding end is normal.
2. Wear anti-static work clothes, shoes and hats, and keep the surface clean.
3. Avoid stacking plastic chairs and sitting frictionally electrified.
4. An anti-static wrist strap can be worn.
Generally, after installing the electronic workshop dry mist humidifier in the electronic workshop, the humidity can be well controlled within a reasonable range, and the production capacity and economic benefits can be significantly improved. Therefore, choosing an industrial humidifier for humidification is a reasonable and necessary move.
Read recommendations:
Understand the working principle of air purifier!Air purifier manufacturer
What water should an industrial humidifier use?
NextIndustrial humidifier related introduction
Popular recommendation
A19 Aroma Diffuser
2021-09-14A4 Aroma Diffuser
2021-09-14H04 Heater Fan
2021-09-14K3 Home air purifier
2021-09-14A15 Aroma Diffuser
2021-09-14Types of Air Purifiers
2022-03-14The classification of essential oils and the coup of fragrance.aromatherapy diffuser price
2022-04-18What brand of air purifier is good
2022-04-15Misunderstanding of the difference between air purifier and fresh air system.air humidifier price
2021-12-06What are the three purification technologies of car air purification?air humidifier price
2022-07-11Does the humidifier emit radiation
2024-09-28Is using a humidifier at home harmful to the body?
2024-09-09How long does a dehumidifier usually run per day?
2024-09-09Humidifier classification
2024-08-24Humidifiers nourish daily life
2024-08-17Common classification methods for humidifiers
2024-08-10How to dehumidify with a dehumidifier
2024-07-22Working process of dehumidifier
2024-07-22High pressure micro fog humidifier for air conditioning unit
2024-07-13What are the possible reasons why humidifiers do not produce fog
2024-07-08Contact the following for inquiries regarding our services and products.