CREATIVITY CHANGES YOUR LIFE
Tel: +86 0755-84870739
Email: info@nexhc.com
Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |
source:Optimization dedicated release time:2022-09-07 Hits: Popular:aromatherapy diffuser direct sales
With the increase in our efforts to control environmental pollution, the improvement and application of environmental protection equipment has been carried out in various industries. In the thermal power generation industry, fly ash emission pollution affects the environment around the power plant. In order to prevent fly ash pollution and facilitate transportation and storage, the fly ash must be humidified in the ash discharge section of the power plant.
At present, there are two ways to humidify fly ash in thermal power plants: one is to use a double-shaft screw conveyor humidification mixer. This kind of mixer requires a large power source, the mechanical parts are seriously worn during the mixing process, and the uniformity of humidification and mixing is poor; the second is to use a wind-powered humidification mixer.
The advantages of the dual-shaft structure of the industrial humidifier are high mixing efficiency, tight system sealing, and no flying ash. The reducer has a compact structure, small footprint, stable transmission, low noise, uniform stirring, good blade wear resistance, convenient operation and maintenance, and reliable operation. more durable.
The dust humidifier should be installed on the concrete foundation, and the allowable difference of the vertical and horizontal horizontality of the fuselage is one thousandth. Check the integrity of the parts and clean them; correct the misalignment position and adjust the bearing clearance. Check whether there is lubricant in the bearing. If the grease is deteriorated, it should be replaced.
The equipment is fixed on the base, and the cylinder is also supported by four sets of elastic elements, and then the vibration is applied by the excitation device, so that the cylinder vibrates at a high frequency during the operation of the equipment, so that the cylinder wall and the stirring shaft are vibrated at high frequency. The distance maintained between them can also reduce the operating resistance of the equipment, solve the phenomenon of boring and stalled rotors, and reduce the cleaning time of downtime, thereby improving the efficiency of work.
Read recommendations:
The secret that has to be said is that air purifiers are more needed in winter.air purifier covid di
NextCan industrial humidifiers be used in production workshops?
Popular recommendation
J15 Air Humidifier
2021-09-14H04 Heater Fan
2021-09-14J1 water humidifier Air Humidifier
2021-09-14A20 Aroma Diffuser
2021-09-14K3 Home air purifier
2021-09-14Introduction of Mini Humidifier.Car Air purifier
2022-04-08What do we need to pay attention to when using a humidifier?
2021-11-10Air purifier manufacturers tell you top-secret information about formaldehyde!
2021-10-09Does the air purifier have radiation?Air purifier price
2021-10-16Introduction to the working principle of negative ion air purifier
2022-03-25Does the humidifier emit radiation
2024-09-28Is using a humidifier at home harmful to the body?
2024-09-09How long does a dehumidifier usually run per day?
2024-09-09Humidifier classification
2024-08-24Humidifiers nourish daily life
2024-08-17Common classification methods for humidifiers
2024-08-10How to dehumidify with a dehumidifier
2024-07-22Working process of dehumidifier
2024-07-22High pressure micro fog humidifier for air conditioning unit
2024-07-13What are the possible reasons why humidifiers do not produce fog
2024-07-08Contact the following for inquiries regarding our services and products.