Brief talk about the maintenance and maintenance of ultrasonic industrial humidifier after use

　　1. Ultrasonic industry humidifier is the best use of purified water humidification, because many areas of the water quality is hard, that is to say, the content of calcium and magnesium ions is high, coupled with the use of bleaching powder and other water purification agent, these ingredients for humidifier humidification, very unfavorable, a part of calcium and magnesium ions with water spray together, diffusion

　　On the surface of the object and the ground, the "white powder" -like scale is formed after drying, and the other part is precipitated on the surface of the energy exchange sheet and the water tank to form solid scale, which is caused by the impure water quality. Moreover, after the surface of the energy exchange sheet is scaled, it will affect the humidification effect, and even if it is not cleaned in time, it will lead to the load of the energy exchange sheet and burn out

　　Energy exchange sheets and electronic components.

　　2. Regularly replace the old water in the water tank. Because the water is stored for a long time, the water quality will change.

　　3. Do not add inferior additives (such as perfume) to the water tank, which may easily cause cracks in the water tank and the water base, affecting the normal operation of the machine.

　　4. When storing the humidifier, clean and dry the part with water. It is better to place it in a ventilated place and air dry it before putting it into a packing box. < Tip: Never use plastic bags for collection >

　　5. Three points should be paid attention to in cleaning the energy exchange sheet:

　　First, disconnect the power supply and start the operation.

　　Secondly, various special cleaning agents should be used to remove, and 5-8 drops of cleaning liquid should be dropped on the surface of the energy exchange sheet during cleaning. Of course, it should also be increased or decreased according to the scale degree, until the scale is removed. Pay attention to the fact that hard tools can not be used to forcibly remove the scale, so as not to scratch the energy exchange sheet.

　　Finally: after cleaning, rinse the sink with clean water. When rinsing, do not pour water into or splash into the inside of the machine base, so as not to cause short circuit and damage electronic components.

　　6. Water level float switch, in the process of use should also pay attention to check, if the float scale, weight increase, will also lose the waterless stop function, affect the normal work of the machine.

　　7. Air duct cleaning, all kinds of humidifiers (except electric type) have pneumatic devices, with this device, with air inlet and outlet, long time use of air inlet, will also lead to dust blockage, cause air inlet is not smooth, directly affect the diffusion of water fog. The air inlet and outlet of the machine should be cleaned regularly.

Read recommendations:

TS01

A15 Aroma Diffuser

After the decoration of the new house, the core removal object of formaldehyde should be the bedroom

water humidifier company

aroma diffuser manufacture