The working principle and precautions of the soap dispenser

　　The induction soap dispenser is equipped with a human body induction device near the liquid outlet. When the sensor of the lens and the pyroelectric tube senses the signal sent by the human body, the electronic circuit will output and amplify it to form a signal to open the switch to drive the internal The DC motor rotates. Push the switch piston to squeeze the soap out.

　　1. When the liquid level in the induction soap dispenser is used in a small position, it must be replenished immediately, otherwise the soap liquid will not flow out normally;

　　2. Avoid collisions, heavy blows and falls during use, because there is a precise structure inside, which is likely to cause serious damage to the interior;

　　3. The sensor soap dispenser cannot be washed with water, but should be scrubbed with a towel with light humidity;

　　4. The sensor soap dispenser cannot be placed at an angle during use, which will cause the internal soap to leak out;

　　5. When you do not need to use the induction soap dispenser, turn off its power switch, take out the battery, and store it in a ventilated and dry place;

　　6. Don’t expose to the sun, too strong sunlight will affect its function.

Read recommendations:

J6 mini humidifier Air Humidifier

F19 Cooling Fan

Some knowledge of air purifier and humidifier.portable air purifier Vendor

Air purifier wholesale

F11 Cooling Fan