CREATIVITY CHANGES YOUR LIFE

Tel: +86 0755-84870739

Email: info@nexhc.com

Home  >  News  >  Industry news

News

Company news | Industry news | Exhibitions and events | Optimization dedicated | aromatherapy diffuser |

The basic principle and installation of high-pressure micro-mist humidifier

source:Industry news    release time:2022-01-24    Hits:     Popular:aromatherapy diffuser direct sales

  The basic principle and installation of high-pressure micro-mist humidifier(图1)

  The working principle of the high-pressure micro-mist humidifier is to use a high-pressure plunger pump to increase the water pressure to a certain pressure, and then the pressurized water is atomized by a professional nozzle through a high-pressure transmission pipeline to produce micro-mist particles, so that it can be Quickly absorb heat from the air to complete vaporization and diffusion, thereby achieving the purpose of air humidification and cooling.

  Ultra-micro atomizing nozzle: The core part is made of titanium alloy material and comes with a pressure-limiting start valve. The shell is made of copper or stainless steel. It has the characteristics of fine spray, no wear, low pressure loss, anti-clogging, and no dripping. The main engine of the high-pressure micro-mist humidification system adopts an industrial plunger pump, which can operate continuously for 24 hours. The nozzle and water mist distributor have no power and vulnerable parts, and will not be damaged in a high dust environment. The humidification capacity is large and the nozzles can be freely combined. The humidification capacity is steplessly adjusted from 5kg/h∽900kg/h. The water in the high-pressure micro-mist system is sealed and non-circulated, and will not cause bacteria to multiply.

  Installation of high-pressure spray humidifier in air conditioning unit

  1. When installing high-pressure spray in the air conditioning unit, the principle of heating first and then humidifying should be followed, which will help improve the humidification efficiency;

  2. A precise water filter must be installed at the water supply inlet of the humidifier to reduce water turbidity and prevent nozzle blockage;

  3. If the water quality is too hard, in order to prevent scale clogging the nozzle and white powder during long-term use, it is recommended that the nozzle be cleaned frequently;

  4. In the air conditioning unit, it is better to set a water baffle after the high-pressure micro-mist humidification section to prevent unatomized water from drifting with the air to the motor or entering the air duct, affecting its life. The best water baffle is a wet film water baffle, which not only can effectively block water, but also can humidify twice and improve the humidification efficiency;


Read recommendations:

J7 Air Humidifier

K6 portable air purifier Car Air purifier

How to improve the happiness of life? One aroma diffuser is enough!aroma diffuser sales

Air purifier wholesaler

aromatherapy diffuser direct sales

Latest news

Hot

Inquiries

Contact the following for inquiries regarding our services and products.

Inquiry form